How to Reset Epson L360 Easily

Article Summary

Epson L360 Resetter return waste ink pad counter to zero to solve the "service required" error without going to the service center.
Use the method manuals first; if it fails, use Epson Adjustment Program software for a more effective reset.

Disclaimer: This summary was created using Artificial Intelligence (AI)

How to Reset Epson L360 Easily

The printer suddenly stops and a notification appears. service required It really makes you panic, especially if you need to print important documents.

One of the most sought-after solutions for users is the Epson L360 resetter because it is considered practical and can solve problems without having to go directly to a service center.

MLBB Product Recommendations

Rp. 29,500
4.5 | Sold 3152

Rp. 3,700
4.7 | Sold 3144

IDR 147,500
4.5 | Sold 2930

Rp. 108,100
4.6 | Sold 2927

Rp. 29,600
4.7 | Sold 2568

Rp. 3,600
4.6 | Sold 2417

Rp. 78,100
4.5 | Sold 2374

Rp. 45,200
4.3 | Sold 1740

Rp. 29,700
4.7 | Sold 1583

Rp. 108,800
4.8 | Sold 1475

This problem usually occurs because the system detects that the waste ink count is full, even though the printer still looks normal physically.

With the right steps, you can restore your printer's functionality to its original state and resume printing without any hassle.

Also read:

What is Epson L360 Resetter?

Resetter Epson L360 is a software (software) or the Adjustment Program (AdjProg) tool which is used to overcome blinking errors “service required” on the Epson L360 printer.

Usually this problem appears when the printer has reached the waste ink count limit or what is known as the waste ink pad counter.

In simple terms, every time you print a document or perform a head cleaning process, the printer will dump the remaining ink onto a special pad (waste ink pad).

Epson printers are programmed to count the number of times this process occurs. When the maximum limit is reached, the printer will automatically stop working as a safety measure.

This is where the Epson L360 resetter comes in. This tool resets the waste ink pad counter to zero, allowing the printer to be used again without having to take it to a service center.

Many people choose to use a resetter because it's more practical and cost-effective. You don't need to pay for servicing if the counter is simply full.

How to Reset the L360 Printer

There are two ways you can reset the Epson L360 printer, namely the manual method (buttons) and the automatic method using resetter software.

How to Manually Reset (Button)

You can try this method first before using the software.

Unplug the power cable
Turn off printer, then unplug the power cord from the power source. Let it sit for 1–2 minutes to allow the system to completely shut down.

Turn on & Press Resume
Reconnect the power cable, then press the Power button to turn on the printer. Then, press the Resume button.

Press the Buttons Simultaneously
Press the Power and Resume buttons simultaneously, hold for 5 seconds, then release.

Repeat Steps
Press the Power and Resume buttons simultaneously again, holding them for about 3–5 seconds. Wait for the printer to finish working and the indicator lights to return to normal. This process usually takes a few minutes.

You need to know, this manual method does not always work if the error is caused by the waste ink pad counter having actually reached its maximum limit.

How to Automatically Reset (Software Resetter)

If the manual method doesn't work, you can use the Epson L360 resetter software.

Download the Resetter Application
Search for and download the "Epson Adjustment Program" specifically for the L360 model. Make sure you get the correct file to avoid additional errors.

Open Program
Extract the file if it's a ZIP file, then run the application. Click the Select menu, select the "L360" model, and then click OK.

Select Mode
Go to the Particular Adjustment Mode menu, then select Waste Ink Pad Counter.

Initialization
Check the Main Pad Counter box, then click Check to view the counter status. Then, click Initialization to begin the reset process.

Finish
Follow the on-screen instructions. You'll usually be asked to turn the printer off and then back on. If successful, the indicator lights will return to normal and the printer can be used again.

This method is more effective because it directly resets the waste ink counter system within the printer firmware.

Signs You Need a Reset

Before performing a reset, you need to ensure that the problem is indeed with the waste ink pad counter. Here are some common signs:

The ink and paper indicator lights flash simultaneously continuously.
An error message appears on the computer such as “Waste Ink Pad is almost full” or has reached its limit.
The printer cannot be used even though the ink is full and paper is available.

If the above symptoms appear, it is likely that your printer needs to be reset.

Epson L360 Resetter is a practical solution to overcome the “service required” error due to a full waste ink pad counter.

You can try a manual reset first, but if that doesn't work, using a software resetter is a more effective step.

By following the steps above correctly, your Epson L360 printer can return to normal without having to go to a service center.

However, keep in mind that a reset only resets the count. If the printer has been in use for a long time, you should also consider cleaning or replacing the waste ink pad to prevent future problems.

Also read:

We hope this guide helps you troubleshoot your printer quickly and easily!