What is the Epson L120 Resetter and How to Reset it?

Article Summary

Epson L120 Resetter is a software for resetting waste ink pad counter to get the printer back to work without expensive servicing.
Download and run Adjustment Program or WIC Reset, make sure the printer is on, connected to USB, and the antivirus is disabled during the reset process.

What is the Epson L120 Resetter and How to Reset it?

The most frustrating situation when trying to print an important document is when the printer suddenly stops, with the indicator light flashing non-stop. If you're using an Epson L120 and are experiencing this, the problem is most likely with the waste ink pad counter.

The good news is, it's not a malfunction. hardware which requires expensive service fees because this problem can be completely resolved at home. With the help of software Epson L120 resetter which can be downloaded for free, the printer can return to normal.

So, that's all you need to know about resetter. Epson L120 starting from the explanation of the problem, how to download the correct software, to the step-by-step reset steps have been summarized completely here.

Also read:

What is Epson L120 Resetter?

The Epson L120 Resetter is specialized software used to reset the waste ink pad counter on an Epson L120 printer that has reached its maximum limit. This software, also known as the Adjustment Program or AdjProg, works by accessing the printer's internal EEPROM chip.

Every Epson printer, including the L120, has an internal chip that automatically counts the amount of waste ink dumped into the absorbent pad. When the count reaches a maximum, the printer intentionally blocks itself as a protective mechanism to prevent ink overflow.

The resetter functions to reset the count so that the printer considers the ink pad to be still in new condition and can be used normally again.

Epson L120 Resetter

There are two software options that you can use to reset the Epson L120:

Epson Adjustment Program

Epson Adjustment Program, or AdjProg, is the most widely used and recommended resetter tool for resetting the Epson L120 printer. This software can be downloaded for free from various trusted sources online, although it is not an official Epson product.

WIC Reset Utility

WIC Reset is another alternative if the Epson Adjustment Program isn't working properly on your device. This software has a more modern interface and a slightly different process, but the result is the same: resetting the waste ink pad counter to zero.

How to Reset Epson L120 Using Resetter

Once the resetter software has been successfully downloaded and prepared, follow these steps in sequence to ensure the reset process runs smoothly from start to finish.

Preparation Before Doing a Reset

Make sure the printer Epson L120 Make sure the printer is turned on and connected to the computer via a USB cable before opening the resetter software. An unstable connection or a printer that's turned off can cause the reset process to fail midway.

Also, temporarily disable your antivirus program while the reset process is underway. Once all preparations are complete, open the L120.exe file from the extracted folder by right-clicking and selecting Open.

Reset Steps Using the Adjustment Program

Once the software opens, select the Particular Adjustment Mode option in the bottom right corner of the main screen and wait for the menu options window to appear. From the available menus, select Waste Ink Pad Counter and click OK to open the counter management page.

On the Waste Ink Pad Counter page, check the Main Pad Counter box and then click the Check button to see the current percentage of used ink pads. Once the counter value is displayed, click the Initialize button to reset the counter to zero, then click Finish.

Also read:

That concludes our discussion of the Epson L120 resetter and how to easily reset it. So, once you know how, don't forget to try it immediately if this Epson printer is experiencing waste ink.

MLBB Product Recommendations